Connect Systems CS1001 Manual de Instalação descarregar pdf (Página 16)

CS1052 Wireless Signal Strength Meter

The CS1052 may be used with the CS1051 Radio Test Set to align the aerial for

maximum signal strength.

This small hand-held unit allows the aerial to be aligned even when the Radio

Test Set is connected to the aerial lead at the Dualcom’s location and the aerial

is located in another part of the building. See Fig 5.

The use of this optional addition to the Radio Test Set is strongly recommended.

For more information, contact CSL.

Dualcom Polling

In addition to Dualcom continuously monitoring the VDN radio path to its base

station, the VDN network regularly tests communication with every Dualcom.

This is called polling.

If polling detects that there is a communication failure, then the relevant ARC

will be allerted, enabling corrective action to be taken. Polling failure may also

be reported after an extended power failure to the Dualcom. see page 30-32 for

details.

To enable any problems to be quickly and correctly resolved, you should:

1. Ensure that the ARC is kept informed of new and replacement installations

and the ESN & NUA numbers of the equipment that is installed.

2. Ensure also that the installers details are correctly recorded at the ARC.

All Dualcom products are normally polled hourly by the VDN. Polling failure will

be reported to the relevant ARC directly onto their polling RPM (or FEP) equip-

ment or by a fax from Vodafone.

Contact your ARC or a Help Desk for more information.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Sem comentários

Connect Systems CS1001 Manual de Instalação Página 16