Connect Systems CS4000 Manual do Utilizador descarregar pdf (Página 13)

Eclipse 4000 Maintenance Manual

01/12/02 V2.00 Page 13

3. Allowing time for effectiveness

The time required for the detergent to become effective and the concentration will depend on the

detergent in use. Always follow the manufacturers instructions and recommendations.

Once the time has elapsed, final wash down must commence. If activated detergent is left on for longer

than the recommended time, the concentration will increase as the water evaporates and may cause

discolouration of the stainless steels surfaces. With some activated detergents this effect is greater, the

better the quality of the stainless steel. The rougher the surface the greater may be the effect of the

discolouration because the detergent will stay on that surface for longer. The rough surface can be

caused by product particles adhering to it, or even sprayed on disinfectant that is not rinsed off and

allowed to dry.

4. Final wash down/rinse

Final rinse is very important to prevent the discolouration or damage to metal surfaces.

Although there is a temptation in wash down environments to use high-pressure water jets, it must

again be stressed that only low pressure is allowed.

This completes the clean down procedure.

1 2 ... 8 9 10 11 12 13

Sem comentários

Connect Systems CS4000 Manual do Utilizador Página 13